Haier HNSE04 User Manual

7
English
Reversing the Door Hinge
1. Remove the top hinge cover.
2. Using Phillips Head Screwdriver, loosen and remove the screws holding the
top hinge in place.
3. Remove top hinge and carefully lift off the door.
4. Remove the screw hole plugs from the opposite side and insert the plugs in
the screw hole openings of the just removed screws.
5. Remove any loose items in the refrigerator and carefully turn refrigerator on
its back and place in a secure area.
6. Loosen the screws holding the lower hinge bracket to the refrigerator and
remove screws and bracket.
7. Remove (2) screws from the other side and insert in the previously removed
screw holes.
8. Remove door pin by turning counter clockwise and reinsert to the underside
of the bracket and tighten.
9. Align bracket and insert (2) remaining screws into the holes provided .
10. Align hole in the door with the door pin and washer and gently push down
until firm.
11. Align upper hinge bracket with screw holes insert screws and partially
secure, check that door and cabinet are properly aligned and then secure
tightly.
12. Replace hinge cap.

Haier HNSE04 Specifications

General

Door hinge	Right
Product color	White
Reversible doors	Yes
Appliance placement	Freestanding
Door type	Single
No Frost system	No
Total net capacity	- L
Total gross capacity	113 L
Fridge number of shelves/baskets	3
Freezer position	Top-placed
Package weight	28000 g

Weight and Dimensions

Depth	530 mm
Width	480 mm
Height	850 mm
Weight	25000 g