2
Operation
Unit start / stop
AUTO LO MED HI
Note:
In DRY mode, when room temperature becomes lower than temp.
o
setting+2 C, unit will run intermittently at LOW speed regardless
In HEAT mode,warm air will blow out after a short periodof the time
When FAN is set to AUTO, the air conditioner automatically adjusts
next time,just press ON/OFF button and unit will run in previous status.
Remote controller can memorize each operation status. When starting it
Cooling only unit do not have displays and functions related with heating
Press ON/OFF button, unit starts or stops.
ON/OFF
FAN
HEALTH
FAN
MODE
SWING
According to the automatic choice
system in temperature in indoors
cold or make the hot movement
ON/OFF
HEALTH
FAN
MODE
automatically adjusts
1.
2.In FAN operation mode
Auto Operation
Cool Operation
FAN
MODE
SWING
Heat Operation
FAN
MODE
SWING
Dry Operation
FAN
MODE
SWING
Fan Operation
When FAN is set to AUTO,
the air conditioner
the fan speed according
to room
temperature.
the unit will not operate
in COOL mode but only
in FAN mode ,AUTO is not available in FAN mode.And temp.setting is disabled.
of FAN setting.
due to cold-draft prevention function.
the fan speed according to room temperature.
Note:
FAN
MODE
SWING
(1)
Air Flow Direction Adjustm
Select temp.setting
FAN
MODE
SWING
Operation
Mode
AUTO
Remote
Controller
Note
COOL
DRY
HEAT
FAN
In DRY mode, when room temperature becomes
lower than temp.setting+2
o
C,unit will run intermittently
at LOW speed regardless of FAN setting.
Under the mode of auto operation, air conditioner will
automatically select Cool or Heat operation according
to room temperature.
air conditioner
automatically adjusts the fan speed
temperature.
When FAN is set to AUTO, the
according to room
In FAN operation mode, the unit will not operate in
COOL or HEAT mode but only in FAN mode ,AUTO is
not available in FAN mode.And temp.setting is disabled.
In FAN mode,SLEEP operation is not available.
To Next Page
Loading...
Need help?
General
