3-Control panel
EN
Stain remova l S team
T emp.
SpeedEx tra Ri nse
REFRESH
525 DRUM
6
5
8
Stain removal
Dry Level Delay
i-Refresh
Extra Rinse Speed
Temp.
Taches
Séchage
Fin différée
i-Refresh
Rinçage + Essorage
Temp.
Stain removal
Delay
Steam
Extra Rinse
Speed
Temp.
1 “Power“ button
2 Programme selector
3 Display
4 Detergent /Softener drawer
3.1 “Power“ button
Touch this button (Fig. 3-2) gently to switch on, the dis-
play is shining, the indicator of the “Start/Pause” button
is fl ashing. Press it again for about 2 seconds to switch
off . If no panel element or programme is activated after
a while machine will shut down automatically.
3.2 Programme selector
By turning the knob (Fig. 3-3) one of 14 programmes
can be selected, related LED will light up, its default
settings will be displayed.
3.3 Display
The display (Fig. 3-4) shows following information:
▶ Washing time
▶ End time delay
▶ Error codes and service information
▶ Function buttons and “Start/Pause“ button
5 Function buttons
6 “Start/Pause“ button
Note : Acoustic signal
In following cases an acoustic signal sounds:
▶ when pressing a button
▶ when turning the programme selector
▶ at the end of programme
The acoustic signal can be deselected if necessary ; see DAILY USE (see P17 6.13).
ol panel
Stain remova l Steam
Temp.
SpeedEx tra Ri nse
6
5
3-2
3-1
3-3
3-4
To Next Page
Loading...
Need help?
General