14
In order to see the stored goods clearly, a LED light has been installed in the cabinet. You can control
light “on” or “off ” by “Light” button to save energe, please turn off the light after observing the stored
goods in the refrigerator(only for HYC-68A/118A).
The light is on when the door is open; The light is off when the door is closed(only for HYC-68/118).
When the power is down, power-off alarm function is activated, buzzer with 1 Hz frequency
continuously beeps,at the same time alarm indicator light of the board fl ashes, if alarm equipment is
connected to the remote alarm port, it will alarm synchronously and last at least 8 hours. Press the
"Alarm" button to cancel the power off alarm, while the remote alarm function is cancelled.
Inner light
Power failure alarm function
1.Remote alarm terminal is installed on the refrigerator and the alarm signal
behind the compartment is output by the terminals. The bearing capacity of
the terminals is DC 30V, 2A.
2.Terminal output:Remote alarm terminals include NO, NC and COM. The
user can choose “NO” or “NC” if needed.
Remote Alarm Terminal
COM
NO
NC
1.Battery switch is installed on the back of the
products，with“Charge Battery Switch”label；
2.Battery switch “ON” indicates that battery is on ；
“OFF” indicates that battery is off
。
Battery Switch
HYC-118/118A HYC-68/68A
Charge Battery S witch
充电电池开关
To Next Page
Loading...
Need help?
General
