Haier L39B2180 User Manual

Introduction
5. Remote Control Installing Batteries
1). Open the battery compartment cover on the back of the remote control.
2). Insert two 1.5V AAA size batteries observing the polarity markings inside the battery
compartment. Don’t mix di
fferent types or used batteries with new ones.
3). Close the cover.
- The remote control should be operated within 23 feet (7m) and 30
0
to the left and right of the
IR receiver at the front of the TV.
- Used batteries should be disposed of properly
9
4. Base Stand Assembly Instructions
Note: the pictures below are only for reference
1. Put the stand on the TV set
2. Screw the stand in the positions with the screws supplied (4 x B4 x 16).
Parts
needed for base stand assembly
Installation
(Gently place the TV face down on a soft, flat surface, such as a blanket,
foam, or cloth.)
Rear cabinet of TV
Screws:4 x B4 x 16 (supplied)
TV stand
Screws: 4xB4x16
Batteries shall not be exposed to excessive heat such as direct sunlight or fire.
Step 1 Step 2 Step 3
Battery
Compartment
Cover
2 x AAA Battery

Haier L39B2180 Specifications

General

Comb filter	3D
Response time	8 ms
Display diagonal	38.5 \
Progressive scan	Yes
Display brightness	400 cd/m²
Display technology	LCD
Native aspect ratio	16:9
Supported video modes	1080p
Contrast ratio (dynamic)	15000:1
Supported graphics resolutions	1920 x 1080 (HD 1080)
Package depth	210 mm
Package width	1045 mm
Package height	735 mm
Package weight	21318 g
DVI port	No
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Compatible memory cards	Not supported
Digital audio coaxial out	1
Digital audio optical out	0
On Screen Display (OSD) languages	ENG, ESP, FRE
Product color	Black
Panel mounting interface	400 x 200 mm
Audio formats supported	MP3
Image formats supported	JPG
RMS rated power	20 W
Number of speakers	2
Tuner type	Analog & digital
Analog signal format system	NTSC
Digital signal format system	ATSC

Weight and Dimensions

Depth (with stand)	250 mm
Width (with stand)	941 mm
Height (with stand)	655 mm
Weight (with stand)	16873 g
Depth (without stand)	120 mm
Height (without stand)	591 mm
Weight (without stand)	14923 g