SUPPORTED MODE
PC
3
1024x768
60
1
640x480
60 31.47
2
800x600
60 37.88
48.36
RESOLUTION
V.Freq.(KHz) H.Freq.(KHz)
4
1360x768
60 47.7
Introduction
EN-6
Base Stand Assembly Instruction
Locate the TV in a room where light does not strike the screen directly. Total darkness or a
reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Please do not attempt to rotate the TV on the stand.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
INSTALLATION NOTES
2. Attach the stand base set to the bottom
4pcs black screws.
1.Place the TV with the display side down on a flat
surface. Use a cloth to protect the display. Attach the
the supplied 4pcs silver screws.
To Next Page
Loading...
Need help?
General
