Hanns.G HW-173ABB User Manual

User’s Manual
MAKING CONNECTIONS
CONNECTING TO A PC
Turn off your computer before performing the procedure below.
1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the
computer’s D-Sub port.
2. Connect one end of DVI-D cable (Dual input mode optional) to the back of the monitor and
connect the other end to the computer’s DVI-D port.
3. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to
the Wall outlet.
4. Turn on your monitor and computer.
Figure.2. Connecting to a PC
1. Power AC Input 2. DVI-D Input (optional)
3. VGA Input
9

Hanns.G HW-173ABB Specifications

General

Brand	Hanns.G
Model	HW-173ABB
Category	Monitor
Language	English