Harman Kardon AVR 1610 Manual

HARMAN KARDON
®
AVR 1610
What’s in the box
• 1 Harman Kardon® AVR 1610 A/V receiver
• 1 programmable remote control
• 1 EzSet/EQ III microphone with 22' (6.7m) cable
• 1 AM loop antenna with 2' (0.6m) cable
• 1 FM antenna with 6' (1.8m) cable
• 2 AAA batteries
• Quick-start guide
• Warranty card
• Safety sheet
Available Downloads
• Harman Kardon Remote app for compatible iOS products
from the iTunes App Store
• Harman Kardon Remote app for compatible Android
products from the Google Play service
Harman Kardon AVR 1610
Audio Section
• Stereo power: 85W per channel, two channels driven @
6/8 ohms, 20Hz – 20kHz, <0.1% THD
• Multichannel power: 85W per channel, two channels
driven @ 6/8 ohms, 20Hz – 20kHz, <0.1% THD
• Input sensitivity/impedance: 250mV/27k ohms
• Signal-to-noise ratio (IHF-A): 100dB
• Surround system adjacent channel separation:
• Frequency response (@1W): 10Hz – 130kHz (+0dB/–3dB)
• High instantaneous current capability (HCC): ±29 amps
• Transient intermodulation distortion (TIM): Unmeasurable
• Slew rate: 40V/sec
All the power you need to enjoy the devices you love.
FM Tuner Section
• Frequency range: 87.5MHz – 108.0MHz
• Usable sensitivity IHF: 1.3µV/13.2dBf
• Signal-to-noise ratio (mono/stereo): 70dB/68dB
• Distortion (mono/stereo): 0.2%/0.3%
• Stereo separation: 40dB @1kHz
• Selectivity (±400kHz): 70dB
• Image rejection: 80dB
• IF rejection: 80dB
AM Tuner Section
• Frequency range: 520kHz – 1,610kHz
• Signal-to-noise ratio: 38dB
• Usable sensitivity (loop): 425µV
• Distortion (1kHz, 50% mod): 1.0%
• Selectivity (±10kHz): 30dB
Video Section
• Television format: NTSC
• Input level/impedance: 1Vp-p/75 ohms
• Output level/impedance: 1Vp-p/75 ohms
• Video frequency response (composite video): 10Hz –
8MHz (–3dB)
• HDMI: Supports up to 4K x 2K
General Specifications
• Power requirement: 120V AC/60Hz
• Power consumption: <0.5W (standby)
; 450W maximum
• Dimensions (H x W x D): 4-3/4" x 17-5/16" x 11-13/16"
(121mm x 440mm x 300mm)
• Weight: 10lb (4.6kg)
© 2013 HARMAN International Industries, Incorporated. All rights reserved. Harman Kardon is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. GreenEdge and the “beautiful/sound” logo are trademarks of
HARMAN International Industries, Incorporated. Apple, iPad, iPhone, iPod, iPod touch and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. iPod, iPhone and iPad not included. Android is a trademark of Google Inc. Use of these trademarks is subject
to Google Permissions. Blu-ray, Blu-ray Disc and their respective logos are trademarks of the Blu-ray Disc Association. DLNA and the DLNA logo are registered trademarks of the Digital Living Network Alliance. Dolby, the double-D symbol and Pro Logic are registered trademarks
HARMAN International Industries, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329 USA
www.harmankardon.com
Go online to register your purchase and access tips
that will show you just how beautiful sound can get.
www.harmankardon.com/registermyproduct
• Dolby Pro Logic
®
/DPLII: 40dB
• Dolby Digital: 55dB
• DTS
®
: 55dB

Harman Kardon AVR 1610 Specifications

Audio Specifications

stereo power	85W per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, <0.1% THD
multichannel power	85W per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, <0.1% THD
input sensitivity/impedance	250mV/27k ohms
signal-to-noise ratio (IHF-A)	100dB
surround system adjacent channel separation (Dolby Pro Logic/DPLII)	40dB
surround system adjacent channel separation (Dolby Digital)	55dB
surround system adjacent channel separation (DTS)	55dB
frequency response (@1W)	10Hz – 130kHz (+0dB/–3dB)
high instantaneous current capability (HCC)	±29 amps
slew rate	40V/sec

FM Tuner Specifications

frequency range	87.5MHz – 108.0MHz
usable sensitivity IHF	1.3µV/13.2dBf
signal-to-noise ratio (mono/stereo)	70dB/68dB
distortion (mono/stereo)	0.2%/0.3%
stereo separation	40dB @1kHz
selectivity (±400kHz)	70dB
image rejection	80dB
IF rejection	80dB

AM Tuner Specifications

frequency range	520kHz – 1, 610kHz
signal-to-noise ratio	38dB
usable sensitivity (loop)	425µV
distortion (1kHz, 50% mod)	1.0%
selectivity (±10kHz)	30dB

Video Specifications

television format	NTSC
input level/impedance	1Vp-p/75 ohms
output level/impedance	1Vp-p/75 ohms
video frequency response (composite video)	10Hz – 8MHz (–3dB)
HDMI support	up to 4K x 2K

General Specifications

power requirement	120V AC/60Hz
power consumption	<0.5W (standby); 450W maximum
dimensions (H x W x D)	4-3/4" x 17-5/16" x 11-13/16" (121mm x 440mm x 300mm)
weight	10lb (4.6kg)