REAR-PANEL CONNECTIONS 7
∞
¶
⁄
fi
ª
¡
£
‹
°
d
g
j
k
i
a
37
35
32
™
¢
§
‚
¤
›
fl
‡
·
f
h
31
38
36
34
33
e
c
b
•
REAR-PANEL CONNECTIONS
¡ CD Audio Inputs
™ Tape Outputs
£ Remote IR Input
¢ Remote IR Output
∞ Preamp Outputs
§ Subwoofer Output
¶ Front Speaker Outputs
• Surround Back Speaker Outputs
ª Surround Speaker Outputs
‚ Center Speaker Output
⁄ Component Video Monitor Outputs
¤ Video 2 Component Video Inputs
‹ DVD Component Video Inputs
› AC Power Cord
fi Switched AC Accessory Outlet
fl Unswitched AC Accessory Outlet
‡ Optical Digital Audio Output
° Coaxial Digital Audio Output
· S-Video Monitor Output
a Coaxial Digital Audio Inputs
b DVD S-Video Input
c Video 1 S-Video Input
d Optical Digital Audio Inputs
e Video 1 S-Video Output
f Video 2 S-Video Input
g 6/8-Channel Direct Inputs
h Video 2 S-Video Output
i Video 3 S-Video Input
j Video Monitor Output
k DVD Audio/Video Inputs
Video 1 Audio/Video Inputs
Video 1 Audio/Video Outputs
Video 2 Audio/Video Inputs
Video 2 Audio/Video Outputs
Video 3 Audio/Video Inputs
Tape Inputs
AM Antenna Terminals
FM Antenna Jack
38
37
36
35
34
33
32
31
NOTE: To assist in making the correct connections for
multichannel input, output and speaker connections,
all connection jacks and terminals are color-coded
in conformance with the CEA standards as follows:
Front Left: White
Front Right: Red
Center: Green
Surround Left: Blue
Surround Right: Gray
Surround Back Left: Brown
Surround Back Right: Tan
Subwoofer: Purple
Coaxial Digital Audio: Orange
Composite Video: Yellow
Component Video “Y”: Green
Component Video “Pr”: Red
Component Video “Pb”: Blue
¡ CD Audio Inputs: Connect these jacks to the
analog audio output of a compact disc player or
changer.
™
Tape Outputs: Connect these jacks to the
RECORD/INPUT
jacks of an audio recorder.
£ Remote IR Input: If the AVR 235’s front-panel
IR sensor is blocked due to cabinet doors or other
obstructions, an external IR sensor may be used.
Connect the output of the sensor to this jack.
¢ Remote IR Output: This connection permits the
IR sensor in the receiver to serve other remote con-
trolled devices. Connect this jack to the “IR IN” jack on
Harman Kardon (or other compatible) equipment.
∞ Preamp Outputs: Connect these jacks to an
optional, external power amplifier for applications for
which higher power is desired.
§ Subwoofer Output: Connect this jack to the line-
level input of a powered subwoofer. If an external sub-
woofer amplifier is used, connect this jack to the sub-
woofer amplifier input.
NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this product
at www.harmankardon.com.
AVR 235 OM 8/30/04 9:18 AM Page 7
To Next Page
Loading...
Need help?
General
