Harman EPM12 User Manual

34
TYPICAL SPECIFICATIONS
Noise (22Hz-22kHz measurement bandwidth)
Mic EIN @ max gain, 150 ohms source impedance -128dBu
Mix @max, faders down <-85dBu
Crosstalk (typ. @ 1kHz)
Channel mute >96dB
Fader cut-off (rel +10 mark) >96dB
Aux send pot offness >86dB
Frequency response
Mic/Line input to any output +/- 0.5dB 20Hz – 20kHz
THD+Noise
Mic gain 30dB, -30dBu input
Mix out, fader max @ 1kHz <0.007 %
Input & output Impedances
Mic input 2.4kΩ
Line input 11kΩ
Stereo input 100kΩ
Outputs 75Ω
Input & output levels
Mic input max level +17dBu
Line input max level +30dBu
Stereo input max level +30dBu
Mix output max level +20dBu
Headphones (@ 200Ω) 300mW
EQ
EQ Bands (Mono input) +/- 15dB
Lo 80Hz
Mid (swept) 140Hz – 3kHz
Hi 12kHz
Q 1.5
EQ Bands (stereo input) +/- 15dB
Lo 80Hz
Hi 12kHz
AVERAGE POWER CONSUMPTION (QUIESCENT)
EPM6 13 Watts
EPM8 14.5 Watts
EPM12 17 Watts
MIN / MAX OPERATING TEMPERATURE
Centigrade / Farenheit 0°C - 50°C / 32°F - 122°F

Harman EPM12 Specifications

General

Brand	Harman
Model	EPM12
Category	Music Mixer
Language	English