l If juice or similar liquid is spilled on the display, wipe
off immediately. Failure to do so may result in product
malfunction.
l The screen is easily marked by ngerprints and tends to
attracts dust, and should therefore be cleaned occasionally.
When cleaning, turn off the power, and wipe lightly with a soft,
dry cloth. To remove dirt, soak a soft cloth in neutral detergent
and squeeze well before wiping. Do not use a wet oor-cloth,
organic solvents (benzene, ethanol, thinner, etc.), acids, or
alkalis. Using such agents will result in screen deterioration.
Furthermore, do not hit the screen or rub it with hard objects.
l Fuji Heavy Industries is not responsible for any damages to the
purchaser or third parties that occur from using the map data.
l We do not provide any replacements or refunds for any mistakes
there may be in the map data displays or contents, such as
misspelling, omissions or misaligned positions.
l Fuji Heavy Industries makes no guarantee that the functions
included in the map data will be appropriate for the specic
objectives of the purchaser.
l Functions that cannot be operated while driving have their colors
toned down when the vehicle is being driven, and their operation
is disabled. Touching a disabled switch may result in the display
of an operation prohibited message on the screen.
l 8-inch with Navi system/8-inch system only: During strong
vibrations, such as when driving on a poor road surface, the
unit may no longer be able to read the data from the disc, and
it will not operate correctly. When the vibration lessens, normal
operation will return after a short time.
l 8-inch with Navi system/8-inch system only: Immediately after
turning on the heater when the temperature is low, dew (water
drops) may adhere to the lens of the CD reader (condensation).
If this happens, leaving the unit for about an hour should remove
the condensation and return the unit to normal operation.
If the unit does not return to normal operation even after several
hours, contact your SUBARU dealer.
l When using the unit for the rst time after purchase, or after
the battery was removed for a long time, the current position
may not be displayed correctly. Wait a short time until the GPS
positioning corrects the displayed position.
l This device is precision-engineered equipment and the recorded
data can be lost as a result of static electricity, electrical noise,
vibration, or other inuences. To protect the device against data
loss, we recommend keeping a separate record of the data that
you record after purchase.
l The screen may be adversely affected or disturbed by noise if
electrical equipment that generates powerful electrical noise
is used near the system. In such cases, keep the electrical
equipment at a distance, or refrain from use.
INTRODUCTION
8
To Next Page
Loading...
Need help?
General
