EasyManuals Logo
Home>Harman>Speaker System>JBL BAR 800

Harman JBL BAR 800 User Manual

Harman JBL BAR 800
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
2424
11. RE-CONNECT THE SUBWOOFER
The soundbar and subwoofer are paired at factories. After
power-on, they are paired and connected automatically. In some
special cases, you may need to pair them again.
3S
SUB PAIRING
5S
To re-enter the subwoofer pairing mode
1. On the rear panel of subwoofer, press and hold until it
turns fast ashing white.
2. To enter the subwoofer pairing mode on the soundbar, press
and hold on the remote control for more than three
seconds. Then, press on the remote control.
J “SUB PAIRING”: The subwoofer is ready for pairing.
J “SUB PAIRED”: The subwoofer is connected.
NOTES:
The subwoofer will exit the pairing mode in three minutes and go to
standby, if pairing is not completed. turns from fast flashing white
to off. To return to the pairing mode, press .
12. PRODUCT SPECIFICATIONS
General specication:
Model: BAR 800 (soundbar unit)
BAR 800 SURROUND (detachable speaker)
BAR 800 SUB (subwoofer unit)
Sound system: 5.1.2 channel
Power supply: 100 - 240V AC, ~ 50/60Hz
Total speaker power output (Max @THD 1%): 720W
Soundbar output power (Max @THD 1%): 340W
Surround speaker output power (Max @THD 1%): 2x 40W
Subwoofer output power (Max. @THD 1%): 300W
Soundbar transducer: 3x (46x90)mm racetrack drivers,
3x 0.75” (20mm) tweeters, 2x 2.75” (70mm) up-ring full-
range drivers
Surround speaker transducer: 1x (46x90)mm
racetrack driver
Subwoofer transducer: 10” (260mm)
Networked standby power: < 2.0 W
Operating temperature: 0 °C - 45 °C
Lithium battery: 3.635V, 3283mAh
Detachable surround speaker playtime: up to 12 Hours
(may vary according to content type and volume level)
HDMI specication
HDMI video input: 1
HDMI video output (with Enhanced Audio Return Channel,
eARC): 1
HDMI HDCP version: 2.3
HDR pass through: HDR10, Dolby Vision
Audio specication
Frequency response: 35Hz - 20kHz (-6dB)
Audio inputs: 1 Optical, Bluetooth and USB (USB playback
is available in US version. For other versions, USB is for
Service only.)
USB specication
USB port: Type A
USB rating: 5V DC, 0.5A
Supporting le formats: mp3
MP3 codec: MPEG 1 Layer 2/3, MPEG 2 Layer 3,
MPEG 2.5 Layer 3
MP3 sampling rate: 16 - 48 kHz
MP3 bitrate: 80 - 320 kpbs
Wireless specication
Bluetooth version: 5.0
Bluetooth prole: A2DP 1.2, AVRCP 1.5
Bluetooth transmitter frequency range:
2400 MHz - 2483.5 MHz
Bluetooth transmitter power: <15 dBm (EIRP)
Wi-Fi network: IEEE 802.11 a/b/g/n/ac/ax (2.4GHz/5GHz)
2.4G Wi-Fi transmitter frequency range: 2412 - 2472 MHz
(2.4 GHz ISM Band, USA 11 Channels, Europe and others
13 Channels)
2.4G Wi-Fi transmitter power: <20 dBm (EIRP)

Other manuals for Harman JBL BAR 800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Harman JBL BAR 800 and is the answer not in the manual?

Harman JBL BAR 800 Specifications

General IconGeneral
BrandHarman
ModelJBL BAR 800
CategorySpeaker System
LanguageEnglish

Related product manuals