Harman JBL PARTYBOX 100 User Manual

11
www.jbl.com
English
7. CARRYING YOUR PARTYBOX
Cautions:
– Before carrying the speaker, make sure that all the cords are
disconnected.
– To avoid personal injury and/or property damage, hold the product
rmly while carrying.
8. SETTINGS
8.1 TWS Mode
The two PartyBox 100 speakers can connect to each other in
TWS mode.
1) Press and hold
on both speakers simultaneously for 5
seconds, you will hear a tone to indicate speakers are in
pairing mode. Once TWS connection built up, you will hear
another tone.
2) In TWS mode, press and hold
for 5 seconds on either
speaker or power off the speaker to exit the TWS mode.
10m (33ft)
8.2 Demo Mode
Caution:
– Ensure PartyBox is powered by AC to go into Demo Mode.
– If the AC power unplugged, the PartyBox will power off. If the AC
power is resumed the PartyBox will automatically enter to the demo
mode.
To enter or to exit demo mode, press and hold and
simultaneously for 5 seconds.
In demo mode, all the input sources are disabled, all buttons but
/ / / are disabled.
Note:
– The PartyBox built-in with 3 x 30 seconds music tracks.
Playback
• Press
once to start, pause or resume the play (one sample
will be played only for 30 seconds).
• Press
once after the pause, to play the next track.
8.3 Standby Mode
The product will enter into sleep mode after 20 minutes without
operation.
• If the“PartyBox” powered by the battery, it will auto power
off if no action for 20 minutes.
• If the “PartyBox” powered by AC or DC power source, the
product will enter standby mode if no action for 20 minutes.
Press
(power) or Bluetooth stream break-in in standby mode,
the speaker will enter normal mode.

Harman JBL PARTYBOX 100 Specifications

General

Brand	Harman
Model	JBL PARTYBOX 100
Category	Speakers
Language	English