Harman JBL Professional BRX 300 Series User Manual

13
USER’S GUIDE
BRX308-ACC TRANSPORTER KIT
1. Position transporter cart so there is ample space to move the loudspeakers around. Prepare cart by releasing all
the Quick Release Pins (QRP’s) as shown in Figure 3.
2. It is convenient to assemble the cart for transport using 2 loudspeakers at a time with the inter-box angle
between the speakers pre set to 0° as shown in Figure 3. This same process can be followed even if
assembling the cart one loudspeaker at a time.
3. Seat the loudspeakers on the cart by rst aligning the front and then the rear rigging points of the bottom
loudspeaker to the attachment points on the cart as shown in Figure 4.
4. Insert the QRP’s and lock loudspeakers in place as shown in Figure 5.
5. Follow the same process for the other two loudspeakers on the other side of the cart.
6. Release the QRP’s on the front top rigging points for the upper speakers as seen in Figure 6.
7. Align the Top Lid so the attachment points match with the front top rigging points on the loudspeakers as seen
in Figure 7.
8. Insert the QRP’s and lock the top lid in place as shown in Figure 8.
ACCESSORIES
Figure 6 Figure 8Figure 7
Figure 3 Figure 4 Figure 5

Harman JBL Professional BRX 300 Series Specifications

General

Brand	Harman
Model	JBL Professional BRX 300 Series
Category	Speaker System
Language	English