30
P68 Pellet Stove
OPTIONS
Side Heat Shields
Side heat shields are available to reduce the
clearance to combustible materials.
Part #1-00-06716
Hopper Extension
The hopper extension allows you to put more pellet
fuel in the hopper and extends burn time on one
load of pellets. The hopper extension adds 60
pounds to the existing 76 pound hopper capacity,
allowing you to load 136 pounds of pellets at one
time.
Part #1-00-08636
Floor Protector
The P68 Steel Floor Protector measures 25 inches
wide by 33 inches deep. It is made of 20 gauge
steel.Thisistheminimumsizeforoorprotection
with this unit.
Part# 1-00-06727
20 gauge steel
oor protector
Decorative Tile/Grey Slate Options
The decorative tile and slate measure 11.938" x
5.938". The tile/slate frame is necessary to hold
the tile or slate in place on the stove. There are
10 decorative tile choices, and 4 decorative slate
choices. See dealer for samples.
The Brushed Stainless deer cutout, pictured below,
is another option available. This cutout reveals the
color of the stove through the cut out shapes.
33"
25"
5.938"
11.938"
frame
tile/slate
Direct Vent Wall Passthrough Kit
You may choose to use the
optional Direct Vent Wall
Passthrough Kit (part #1-00-
677077) which incorporates
v e n t i n g p a s s t h r o u g h
and outside air into one
component.
To Next Page
Loading...
Need help?
General
