15
Bolt the blower to the bottom rear of the stove with
four 1/4-20 bolts. Tighten the bolts, but do not over-
tighten.
The blower speed can be adjusted using the knob
that is built-in to the power cord. When rst starting a
re, keep the blower off. After a good bed of coals is es-
tablished, you can run the blower at any speed desired.
The power cord for the blower must be connected
to a grounded outlet, and must be routed away from
the appliance.
Blower Variable
Speed knob
The top air grill must be installed before the chimney
connector is installed.
To install simply place the top air grill over the ue
out let and position as shown at left. It is held in place
by gravity.
The top air grill is a decorative option that does not
add or subtract from the performance of the stove.
Top Air Grill
To Next Page
Loading...
Need help?
General
