Haylou LS02
advice
1) Please read the manual carefully before using the smart watch and keep it for
future reference.
2) Allow the watch to be fully charged before first use.
3) If you are not using the watch, charge it every 2 weeks to keep the battery life as long
as possible.
4) Use only the included charging cable and an approved quality power supply to charge the
watch.
Warning
1) Never disassemble or repair the watch to avoid damage or injury. 2) Do not expose
the watch to extreme temperatures (below -20 °C and above +45 °C). 3) Do not use
cleaning agents to clean the watch. Clean them with a microfiber cloth.
Activation
When using for the first time, activate the watch by connecting the charger as shown below.
Put the watch on your hand and adjust the strap so that the watch fits comfortably on your
wrist. Heart rate monitoring may not work properly if you wear the watch too loosely or too
tightly.
Pairing with the application
1) Install the Haylou Fit app.
2) Create an account and then follow the on-screen instructions
To Next Page
Need help?
General
