USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
1
IMPORTANT SAFETY INSTRUCTIONS
When installing and using this electrical equipment, basic safety precautions should always be fol-
lowed, including the following:
• READ AND FOLLOW ALL INSTRUCTIONS
• TO REDUCE THE RISK OF DROWNING FROM HAIR AND BODY ENTRAPMENT, INSTALL A SUITABLY
RATED SUCTION GUARD TO MATCH THE MAXIMUM FLOW RATE MARKED. ATTENTION : LES
PRISES DASPIRATION DOIVENT ETRE EQUIPEES DE GRILLES CONVENANT AU DEBIT MAXIMAL
INDIQUE.
• WARNING: To reduce the risk of injury, do not permit children to use this product unless they
are closely supervised at all times.
• Do not bury cord. Locate cord to minimize abuse from lawn mowers, hedge trimmers, and other
equipment.
• WARNING: To reduce the risk of electric shock, replace damaged cord immediately.
• CAUTION: To reduce the risk of electric shock, install at least 10 feet (3 meters) horizontally from
the inside walls of a pool or spa/hot tub. Do not use an extension cord. ATTENTION : MAINTENIR
UNE DISTANCE MINIMALE D’UN METRE, MESUREE DANS UN PLAN HORIZONTAL, ENTRE LE
BASSIN ET LES APPAREILS ET COMMANDES.
• For Canadian Units: At least two lugs marked “BONDING LUGS” are provided on the external
surface or on the inside of the supply terminal box or compartment. To reduce the risk, con-
nect the local common bonding grid in the area of the hot tub or spa to these terminals with an
insulated or bare copper conductor not smaller than No. 6 AWG.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
Need help?
General
