Hayward AquaRite 100 Troubleshooting Guide

Inadequate Water Flow LED
14
With “Standing BY” LED With “Problem Detected” LED
Reason Possible Action
Power to the pump is
turned “off”
Turn power to the pump
“on”
AQR 100 is between
generating cycles
Wait until next generating
cycle begins or cycle power
to the AquaRite 100
Reason Possible Action
No water flow
detected
Verify pump is “on”
Remove power for two minutes
Low water
flow detected
Check for obstructions or other flow
related issues in plumbing. Verify filter is
clean.

Hayward AquaRite 100 Specifications

General

Brand	Hayward
Model	AquaRite 100
Category	Water Pump
Language	English