1
1. PREFACE
In order to provide our customers with quality, reliability and versatility, this
product has been made to strict production standards. This manual includes
all the necessary information about installation, debugging, discharging and
maintenance. Please read this manual carefully before you open or maintain
the unit. The manufacturer of this product will not be held responsible if
someone is injured or the unit is damaged as a result of improper installation,
debugging, or unnecessary maintenance. It is vital that the instructions within
this manual are adhered to at all times. The unit must be installed by qualified
personnel.
• The unit can only be repaired by qualified installer centre personnel or an
authorised dealer (HVAC).
• Maintenance and operation must be carried out according to the recommended
time and frequency, as stated in this manual.
• Use genuine standard spare parts only.
• Failure to comply with these recommendations will invalidate the warranty.
• The Swimming Pool Heat Pump Unit heats the swimming pool water and keeps the
temperature constant.
This type of pump has the following characteristics:
1. Durable
The heat exchanger is made of PVC & titanium; the tube can withstand prolonged
exposure to corrosives such as chlorine.
2. Quiet operation
The unit comprises an efficient rotary compressor and a low noise fan motor, which
guarantees its quiet operation.
3. Electronic control board
The unit is controlled by a micro-controller, allowing all operation parameters to be
set. Operation status can be displayed on the control panel.
To Next Page
Loading...
Need help?
General
