Hayward SharkVAC XL User Manual

12
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
5. Remove the filter cartridges:
a. Unsnap and lift up both filter door latches.
b. Pull out the filter cartridges. Using a garden hose with a spray nozzle, wash the filter
elements to remove debris. Hold the filter elements as shown to allow the debris to fall out.
Filter cleaning solution can be used to remove excessive dirt and/or sand. The cleaner your
filter is the more effective the cleaning will be.
Fig. 7
c. Wash the entire filter bucket assembly. (Previously shown).
d. Place the filter cartridges back into the filter bucket assembly with the center frame
reinforcements facing inward.
Fig. 8
e. Snap the filter door latches into place.

Hayward SharkVAC XL Specifications

General

Brand	Hayward
Model	SharkVAC XL
Category	Vacuum Cleaner
Language	English