1. Whenever you will not be operating your machine
Unplug the machine and then turn the water off.
Leave the door slightly ajar in order to prevent the formation of unpleasant smells.
Keep the machine interior clean.
2. Eliminating water droplets
Wash the dishes with the intensive programme.
Take all of the metal containers in the machine out.
Do not add detergent.
3. If you properly place your dishes into the machine, you will be using it in the best way in
terms of energy consumption, washing and drying performance.
4. Clean all rough waste before you place dirty dishes to the machine.
5. Operate the machine after it is completely full.
6. Use pre-washing program only when necessary.
7. Observe program information and average consumption values table when selecting a
program.
8. Since the machine will reach high temperatures, it should not be mounted near
refrigerator.
9. If the appliance is located in a place where the risk of freezing exists, you must
completely drain the water that has remained in the machine. Turn off the water tap,
disconnect the water inlet hose from the tap and allow the interior water to drain.
To Next Page
Loading...
Need help?
General
