20
One subwoofer with
dual voice coil
Two subwoofers with
single voice coil
In series
Two subwoofers with one voice coil (single voice coil) or
one subwoofer with dual voice coil are connected in series.
Note: The connection of two voice coils in series will result
in doubling the impedance!
RMS output power ≤ 1% THD+N:
Two subwoofers with 1 x 2 Ohms correspond to a total
impedance of 4 Ohms: 500 Watts
One Subwoofer with 2 x 2 Ohms also corresponds to a total
impedance of 4 Ohms: 500 Watts
Two subwoofers with 1 x 1 Ohm correspond to a total
impedance of 2 Ohms: 880 / 1,760 Watts
One subwoofer with 2 x 1 Ohm also correspond to a total
impedance of 2 Ohms: 880 Watts
Note: The negative terminal of the rst voice coil has to be
connected to the positive terminal of the second voice coil
by using a speaker wire with the same gauge as the other
speaker.
Conguration examples
To Next Page
Loading...
Need help?
General
