23
Functionality of the MODE/DIP-Switches
ZLWKÄFDUVSHFL¿FVHWXS³RUÄ3&VHWXS³
Speaker load front / rear channels
Switch 1 OFF = 4 Ohms ON = 2 Ohms
(Subwoofer channels can always handle 2 Ohms
load)
Subwoofer mute
Switch 2
OFF = Subwoofer activated
ON = Subwoofer deactivated
Note: If the subwoofer has been deactivated using
WKLV VZLWFK DQ\ H[LVWLQJ KLJKSDVV ¿OWHUV IRU WKH
front and rear channels will also be deactivated.
This improves bass reproduction of the remaining
loudspeakers.
$PSOL¿HUJDLQ
Switch 3 Switch 4
OFF OFF = amp. gain +/- 0 dB
OFF ON = amp. gain + 4 dB
ON OFF = amp. gain - 2 dB
ON ON = amp. gain + 2 dB
Subwoofer type selector
Switch 5
OFF = PP 7E, PP 7S
ON = PP 5E
Note: The correct setting of this switch is essential
to optimal sound reproduction.
AUX input mode
Switch 6
OFF = MP3 mode
ON = Navigation mode
MP3-Mode = AUX input signal will be routed to
front and rear channels, input will be activated
when signal on the input is detected.
Navigation mode = AUX input signal will be routed
to front channels only, input will be activated when
signal on the input is detected, rear channels still
have radio signal with - 20 dB muting.
Optical input 48 kHz (Interface required)
Switch 7
OFF = optical input deactivated
ON = optical input activated instead of highlevel
input
Switch 8 - 20 Disabled
02'(',36ZLWFK
To Next Page
Loading...
Need help?
General
