11
The “less”, “normal” and “more” bars light up individually indicating your current setting. The “texture”
function applies to these displays with “normal” being the default setting. “texture” is a function that
has 3 times pre-programmed for our select presets. This also affects the consistency of your food.
All functions default to “normal”.
NOTE (Applies to all):
- Pressing the “-“or “+” buttons will switch to “manual” mode.
- Press “start/stop” twice to clear.
- The pressure cooker will clear out in 30 seconds if the “start/stop” button is not pressed.
Pressure:
The function selected will determine the amount of pressure time. In this example, the display will
show “P0:10” (pressure time). The colon or “:” will flash to indicate that the pressure cooker is under
pressure and the timer is counting down.
Example:
Refer to the PRESET TIMES CHART ON PAGE 13 for default times for each function.
Auto Warm Feature:
When pressure cooking is complete, the Pressure Cooker will automatically switch to the warm
function. This allows the pressure to naturally release while your food remains warm. The times for
the presets are listed below.
To Next Page
Loading...
Need help?
General