3
2. Connect the AC adapter to an AC 120V~ 60Hz power source. Use the Power On/Off
Switch to turn the unit ON or OFF.
3. Turn on the unit by sliding the Power On/Off Switch to “ON”. A short melody will be
heard. The Power/Status Indicator should light and flash in blue.
4. If the unit has never been paired/linked with a Bluetooth enabled device before, you need
to follow the pairing instructions below:
a) Turn on the Bluetooth function of your device and enable the search or scan function
to find the unit.
b) Select "KT4557A" from the device list when it appears on your screen. Auto pairing
between the unit and your Bluetooth enabled device will proceed.
NOTE: If you are pairing (linking) the unit to your Bluetooth enabled computer, you may
need to set the KT4557A as the default sound device.
5. After turning on, the unit will search for the last paired device.
6. On successful pairing with your Bluetooth enabled device, you can play music on your
device wirelessly from the speaker
.
7.
Adjust the volume on your Bluetooth enabled device to obtain the desired sound level.
NOTE: All control functions should be achieved from your Bluetooth enabled device.
8. If the unit needs to pair with another Bluetooth device, you need to turn off the Bluetooth
function of the first device and then repeat step 4 above.
9. To turn the unit off, slide the Power On/Off Switch at the back to the OFF position. The
Power/Status Indicator will go off.
AUX INPUT OPERATION
The unit provides an auxiliary audio signal input jack for connecting external audio devices
like MP3 players, CD players or an iPod (except iPod shuffle 3
rd
generation) and listen to
them through the unit speaker.
1. Turn on the unit by sliding the Power On/Off Switch to “ON”.
2. Plug one end of the included audio cable into the AUX IN jack at back of the unit and the
other end into the headphone jack of your external audio device. The flashing blue light
of the unit will become steady.
SLIDE POWER SWITCH
TO TURN UNIT ON
To Next Page
Loading...
Need help?
General
