5
3. Pairing the Bluetooth enabled device to the speaker:
a) Press “
PAIR
” button on the remote control. The
Power/Status indicator
will flash
once.
b) Turn on the Bluetooth function of your device and enable the search or scan function
to find the speaker.
c) Select "KT4559" from the device list when it appears on your device screen. If
required, enter the pass code “0000” to pair (link) the speaker with your device.
d) If you are pairing (linking) your computer to the speaker using Bluetooth, you may
need to set the KT4559 as your computer’s default sound device.
4. After pairing the speaker with the Bluetooth device successfully, you can play music from
your Bluetooth device wirelessly to the speaker
.
5. After selecting your favorite song, press PLAY & PAUSE button on your Bluetooth device
or “Play/Pause”
Button on Remote Control to play or pause the Bluetooth device
playback.
6.
To adjust volume: Touch the left or right ear on speaker at where “V-“ and “V+” are
marked to decrease or increase the volume (Note: This is touch-sensitive and you do not
need to press on the ears), alternatively you can press “
”/ “ ” on the Remote Control.
The POWER/STATUS INDICATOR will flash when the volume is being adjusted.
7.
Press “ ” or “ ” on the Remote Control to select Previous or Next track.
8. Press the “TREB +”/ “TREB –” or “BASS +”/ “BASS –” buttons to adjust the treble or bass
effect as desired. The POWER/STATUS INDICATOR will stop flashing when TREBLE or
To Next Page
Loading...
Need help?
General
