Do not clean the inside or outside with an abrasive scouring pad or steel wool as this
will damage the finish.
NOTE:
Make sure that the plate is cooled down completely before cleaning. High
temperature may cause burning.
Power Cord
In case there is any stain in the power cord, wipe off the stain with dry cloth.
WARNING!!
- DO NOT IMMERSE IN WATER OR ANY LIQUID.
- PROTECTIVE COATING BURNOFF WILL CAUSE SMOKING ON INITIAL USE.
THIS IS NOT HARMFUL.
S
TROUBLESHOOTING GUIDE
ROUBLESHOOTING GUIDE
Please check the below guide and if you still have operating problems, stop the usage of
this unit immediately.
There are no user repairable parts inside. Never attempt to open this unit to repair. Taking
this unit apart could be dangerous if not performed by an authorized repair center and will
void any warranty.
The Preheat lamp is not turned on.
Is the unit plugged in the outlet?
Is the unit plugged in the outlet?
The Preheat Indicator is turning on and off
during cooking.
This unit has a built-in thermostat to avoid over
heating and the Preheat Indicator turns on and
off automatically. This is not a problem with the
unit.
The case rattles when unit is moved.
Small space is made between cases (top and
bottom) to allow for swelling of the dough during
cooking. This is not a problem with the unit.
S
SPECIFICATIONS
PECIFICATIONS
Power Source : 120V~ 60Hz
Power Consumption : 750W
Cord Length : About 40 Inches
ERVICE
To Next Page
Loading...
Need help?
General
