Page 2 For technical questions, please call 1-888-866-5797. Item 56459
IMPORTANT SAFETY INFORMATION
GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury. Save
all warnings and instructions for future reference.
7KHWHUPƎSRZHUWRROƎLQWKHZDUQLQJVUHIHUVWR\RXU
PDLQVRSHUDWHGFRUGHGSRZHUWRRO
Work Area Safety
1. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
FUHDWHVSDUNVZKLFKPD\LJQLWHWKHGXVWRUIXPHV
3. Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with grounded
power tools.8QPRGLILHGSOXJVDQGPDWFKLQJ
outlets will reduce risk of electric shock.
2. Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is grounded.
3. Do not expose power tools to rain or wet
conditions.:DWHUHQWHULQJDSRZHUWRRO
will increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled
cords increase the risk of electric shock.
5. When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a Ground Fault Circuit
Interrupter (GFCI) protected supply.
Use of a GFCI reduces the risk of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
$PRPHQWRILQDWWHQWLRQZKLOHRSHUDWLQJSRZHU
WRROVPD\UHVXOWLQVHULRXVSHUVRQDOLQMXU\
2. Use safety equipment. Always wear eye
protection. 6DIHW\HTXLSPHQWVXFKDV
dust mask, non-skid safety shoes, hard hat,
RUKHDULQJSURWHFWLRQXVHGIRUDSSURSULDWH
FRQGLWLRQVZLOOUHGXFHSHUVRQDOLQMXULHV
3. Prevent unintentional starting. Ensure the switch/
trigger is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.&DUU\LQJSRZHUWRROV
ZLWK\RXUILQJHURQWKHVZLWFKRUHQHUJL]LQJSRZHU
tools that have the switch on invites accidents.
4. Remove any adjusting key or wrench
before turning the power tool on.
$ZUHQFKRUDNH\OHIWDWWDFKHGWRDURWDWLQJSDUW
RIWKHSRZHUWRROPD\UHVXOWLQSHUVRQDOLQMXU\
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
RIWKHSRZHUWRROLQXQH[SHFWHGVLWXDWLRQV
6. Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry
RUORQJKDLUFDQEHFDXJKWLQPRYLQJSDUWV
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
8. Only use safety equipment that has been
approved by an appropriate standards agency.
8QDSSURYHGVDIHW\HTXLSPHQWPD\QRWSURYLGH
DGHTXDWHSURWHFWLRQ(\HSURWHFWLRQPXVWEH
$16,DSSURYHGDQGEUHDWKLQJSURWHFWLRQ
PXVWEH1,26+DSSURYHGIRUWKH
VSHFLILFKD]DUGVLQWKHZRUNDUHD
To Next Page
Loading...
Need help?
General
