Hettich AxisDrive IPS User Manual

14
14
5. Transport and Mounting
5.1 Transport
Move the double drive / slatted bed frame only when powered
down (power cable disconnected from the mains).
5.2 Mounting
Mounting errors may cause fatigue breaks at the double drive.
 Mount the drive in the slatted bed frame or boxspring bed
without producing any shear tension due to offset of the
electrical fittings. Observe parallelism and tolerances as
described in 4.2.2 Dimensions of the Motor hooks /
Electrical Fittings.
Observe the adjustment movement caused by the drive when
designing your bed.
 Mount the double drive so that shearing and crushing
points are not accessible from the outside.
Danger to life from electric power!
The housing of the double drive must not be
opened, removed or damaged.
Before connecting the drive system, among
others correspondence of the electricity type and
mains voltage with the information on the name
plate of the mains unit must be observed.
Danger

Hettich AxisDrive IPS Specifications

General

Brand	Hettich
Model	AxisDrive IPS
Category	DC Drives
Language	English