Hikmicro E1L User Manual

Laser
IR Lens
Cover
Trigger
USB Interface
Micro SD Slot
Tripod
Interface
The warning sign is under and on the left of the laser.
Charging
Indicator
When the device is charging,
the LED indicator is red.
When the device is fully
charged, the LED indicator is
green.
USB
Interface
Charge the battery and export
snapshots with the USB cable.
Trigger
Pull the trigger to capture
snapshots.
When the Laser function is
switched on, pull the trigger to
turn on/off the laser light.
Warning:
The laser radiation emitted from the device can
cause eye injuries, burning of skin or
inflammable substances. Prevent eyes from
direct laser. Before enabling the Light
Supplement function, make sure no human or
inflammable substances are in front of the laser
lens. The wave length is 650 nm, and the power
is less than 1 Mw. The laser meets the
IEC60825-1:2014 standard.
3 Basic Operations
3.1 Charging the Device
Steps:
1. Open the top cover of the camera.
2. Connect the USB interface and the power
adaptor with USB cable.
USB interface

Hikmicro E1L Specifications

General

Brand	Hikmicro
Model	E1L
Category	Digital Camera
Language	English