6
●
Wipe the device gently with a clean cloth and a small quantity of
ethanol, if necessary.
●
If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the device may be impaired.
Using Environment
●
Make sure the running environment meets the requirement of the
device. The operating temperature shall be 15°C to 35°C (59 °F to 95 °F)
or 0°C to 40°C (32 °F to 104 °F), and humidity shall be 5% to 90%.
●
Place the device in a dry and well-ventilated environment.
●
DO NOT expose the device to high electromagnetic radiation or dusty
environments.
●
DO NOT aim the lens at the sun or any other bright light.
Emergency
●
If smoke, odor, or noise arises from the device, immediately turn off the
power, unplug the power cable, and contact the service center.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,
Binjiang District, Hangzhou, Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd
COMPLIANCE NOTICE: The thermal series products might be subject to
export controls in various countries or regions, including without
limitation, the United States, European Union, United Kingdom and/or
other member countries of the Wassenaar Arrangement. Please consult
your professional legal or compliance expert or local government
authorities for any necessary export license requirements if you intend to
transfer, export, re-export the thermal series products between different
countries.
To Next Page
Loading...
Need help?
General
