HIKVISION 64 Series User Manual

Installation Manual of Network Camera
33
 For cement surface mounting, you need to use the expansion screw to fix the camera.
 For wooden surface mounting, you can just use the self-tapping screw to fix the camera.
2. Hang the hook which is on upper-side of the main unit onto the rail, press a little harder on the
lower part of the main unit, and then the elastic clasp will be automatically buckled. As shown in
figure 6-4
Figure 6-4 Buckle the Main Unit
If you already had a standard rail to be installed, you can buckle the main unit onto the installed rail
directly.
Figure 6-5 Buckle the Main Unit onto Standard Rail
6.2.2 Installation of Block-Shaped Sensor Unit
This series of camera support concealed mounting and exposed mounting with a decorative cover.

HIKVISION 64 Series Specifications

General

Brand	HIKVISION
Model	64 Series
Category	Security Camera
Language	English