EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2CD1143G0-I

HIKVISION DS-2CD1143G0-I User Manual

HIKVISION DS-2CD1143G0-I
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #129 background imageLoading...
Page #129 background image
Network Camera User Manual
128
You can press the Emergency button on the remote control to trigger the Emergency
Alarm in case of an emergency.
Note: The remote control is required for the Emergency Alarm. Go to Configuration >
System> System Settings > Remote Control to study the remote control first.
Steps:
1. Enter the Emergency Alarm Settings interface:
Configuration > Event > Basic Event> Emergency Alarm
Setting Emergency Alarm
2. Check the checkbox to select the linkage methods taken for the Emergency alarm.
3. Click Save to save the settings.
Smart Events
You can configure the smart events by following the instructions in this section,
including audio exception detection, defocus detection, scene change detection,
intrusion detection, and line crossing detection, etc. These events can trigger the
linkage methods, such as Notify Surveillance Center, Send Email, Trigger Alarm
Output, etc.
Configuring Audio Exception Detection
Purpose:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD1143G0-I and is the answer not in the manual?

HIKVISION DS-2CD1143G0-I Specifications

General IconGeneral
Video streamingYes
Total megapixels4 MP
Maximum resolution2560 x 1440 pixels
Image quality adjustmentBrightness, Contrast, DNR, Saturation, Sharpness
Video compression formatsH.264, H.264+, H.265, H.265+, M-JPEG
Supported graphics resolutions320 x 240, 640 x 360, 640 x 480 (VGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 2304 x 1296, 2560 x 1440
Sensor typeCMOS
Number of sensors-
Optical sensor size1/3 \
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired
Maximum operating distance30 m
DC output current0.4 A
DC output voltage12
Power source typeDC, PoE
Power consumption (max)5 W
Power consumption (Power over Ethernet (PoE))7 W
IK codeIK10
Form factorDome
Mounting typeCeiling/wall
Product colorBlack, White
Housing materialMetal, Plastic
International Protection (IP) codeIP67
Pan range0 - 355 °
Tilt angle range0 - 70 °
Camera shutter speed1/3 - 1/100000 s
Minimum illumination0.01 lx
Field of view (FOV) angle117 °
LED typeIR
Infra-red wavelength850 nm
Wi-FiNo
Number of users32 user(s)
Networking standardsIEEE 802.3af
Ethernet interface type10 Gigabit Ethernet, 100 Gigabit Ethernet
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour
Ethernet LAN (RJ-45) ports1
Operating temperature (T-T)-30 - 50 °C
Weight and Dimensions IconWeight and Dimensions
Width111 mm
Height82.4 mm
Weight410 g
Package weight610 g

Related product manuals