EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2CD1143G0-I

HIKVISION DS-2CD1143G0-I User Manual

HIKVISION DS-2CD1143G0-I
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #159 background imageLoading...
Page #159 background image
Network Camera User Manual
158
counting accuracy, make sure your camera is installed horizontally.
Steps:
1. Enter the Counting Configuration interface: Configuration > People Counting.
People Counting Configuration
2. Check Enable People Counting checkbox to enable the function.
3. Set the detection line.
An orange line, named as detection line can be set on the live video, and the
object entering or exiting through the line will be detected and counted.
Click button on the left of the live view image. An orange line will
appear on the image.
Drag the detection line to adjust its position.
Drag the yellow end points of the detection line to adjust its length.
Note:
The detection line should be drawn at the position right below the
camera, and it should cover the whole entrance/exit.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD1143G0-I and is the answer not in the manual?

HIKVISION DS-2CD1143G0-I Specifications

General IconGeneral
Video streamingYes
Total megapixels4 MP
Maximum resolution2560 x 1440 pixels
Image quality adjustmentBrightness, Contrast, DNR, Saturation, Sharpness
Video compression formatsH.264, H.264+, H.265, H.265+, M-JPEG
Supported graphics resolutions320 x 240, 640 x 360, 640 x 480 (VGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 2304 x 1296, 2560 x 1440
Sensor typeCMOS
Number of sensors-
Optical sensor size1/3 \
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired
Maximum operating distance30 m
DC output current0.4 A
DC output voltage12
Power source typeDC, PoE
Power consumption (max)5 W
Power consumption (Power over Ethernet (PoE))7 W
IK codeIK10
Form factorDome
Mounting typeCeiling/wall
Product colorBlack, White
Housing materialMetal, Plastic
International Protection (IP) codeIP67
Pan range0 - 355 °
Tilt angle range0 - 70 °
Camera shutter speed1/3 - 1/100000 s
Minimum illumination0.01 lx
Field of view (FOV) angle117 °
LED typeIR
Infra-red wavelength850 nm
Wi-FiNo
Number of users32 user(s)
Networking standardsIEEE 802.3af
Ethernet interface type10 Gigabit Ethernet, 100 Gigabit Ethernet
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour
Ethernet LAN (RJ-45) ports1
Operating temperature (T-T)-30 - 50 °C
Weight and Dimensions IconWeight and Dimensions
Width111 mm
Height82.4 mm
Weight410 g
Package weight610 g

Related product manuals