EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2CD2112-I

HIKVISION DS-2CD2112-I Installation Manual

HIKVISION DS-2CD2112-I
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
Installation Manual of Network Camera
55
Ceiling Mounting With Gang Box
Steps:
1. Disassemble the camera.
2. Install the gang box in the ceiling.
3. Attach the mounting base to the gang box with two screws.
Mounting Base
Figure 3-69 In-ceiling Mount
4. Route the cables through the hole in the center of the mounting base.
5. Align the camera with the mounting base.
6. Tighten the screws to secure the camera with the mounting base.
7. Connect the video output connector to the monitor. Connect the power connector to the power
supply.
8. Adjust the image and focus. Please refer to the Image and Focus Adjusting for more detailed
information.
Figure 3-70 Secure Camera
Lo-Call 1890 866 900
www.cctvireland.ie
shop@cctvireland.ie

Table of Contents

Other manuals for HIKVISION DS-2CD2112-I

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD2112-I and is the answer not in the manual?

HIKVISION DS-2CD2112-I Specifications

General IconGeneral
TypeIP security camera
PTZ control-
Placement supportedOutdoor
Connectivity technologyWired
Wide Dynamic Range (WDR)Yes
Form factorDome
Mounting typeCeiling
Product colorWhite
Protection featuresVandal proof
International Protection (IP) codeIP66
Total megapixels1.3 MP
Maximum resolution1280 x 960 pixels
Supported video modes720p
Video formats supportedH.264, M-JPEG
Supported graphics resolutions704 x 576, 1280 x 960, 1280 x 720 (HD 720), 640 x 480 (VGA)
Pan range0 - 355 °
Tilt angle range0 - 65 °
Camera shutter speed1/25 - 1/100000 s
Minimum illumination0.01 lx
Field of view (FOV) angle73.1 °
Sensor typeCMOS
Optical sensor size1/3 \
Optical zoom- x
Focus adjustment2.0
Fixed focal length12 mm
Password protection typeUser
LED typeIR
Night vision distance30 m
Wi-FiNo
Cabling technology10/100Base-T(X)
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Ethernet LAN (RJ-45) ports1
DC output voltage+12V
Power source typePoE
Power consumption (max)7 W
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Weight and Dimensions IconWeight and Dimensions
Height82 mm
Weight500 g
Diameter111 mm

Related product manuals