HIKVISION DS-2CD2412F-I User Manual

Network Camera·Quick Operation Guide
15
15
4 Setting the Network
Camera over the LAN
Purpose:
To view and configure the camera via LAN (Local Area Network),
you need to connect the network camera in the same subnet with
your PC. Then, install the SADP or iVMS-4200 software to search
and change the IP of network camera.
The SADP and iVMS-4200 software are on the disk in the camera
packet.
 Connection of network camera and PC:
\
Figure 4-1 Wiring over LAN
 Set the IP address of the camera for accessing via LAN.
Steps:
Network Cable
Network Cable

HIKVISION DS-2CD2412F-I Specifications

General

Brand	HIKVISION
Model	DS-2CD2412F-I
Category	Security Camera
Language	English