HIKVISION DS-2CD2443G0-IW Series User Manual

Network Cube Camera·Quick Start Guide
43
43
6.4 Initializing the Memory Card
Steps:
Check the memory card status by tapping on the Storage Status in
the Device Settings interface.
If the memory card status displays as Uninitialized, tap to initialize
it. The status will then change to Normal. You can then start
recording any event triggered video in the camera such as motion
detection.

HIKVISION DS-2CD2443G0-IW Series Specifications

General

Brand	HIKVISION
Model	DS-2CD2443G0-IW Series
Category	Security Camera
Language	English