HIKVISION DS-2CD2512F-I User Manual

Network Mini Dome Camera·Quick Operation Guide
10
10
 No.8 is the audio/alarm cable interface, of which the “I” mark
connects to the alarm input, the “o” mark connects to the
alarm output, the “GND” mark connects the grounding, and the
“A” mark connects the audio output.
 WPS (Wi-Fi Protected Setup, also known as AOSS or QSS) is a
computing standard that attempts to allow easy establishment
of a secure wireless network. Refer to user manual for details.
 A wireless router with the WPS function is required to enable
the WPS function of the camera. Refer the steps below.
Steps:
Press the WPS button on the router. 1.
Press the WPS button (about 2s) on the camera within 120s 2.
you enable the WPS of the router to join in the wireless
network.
 The WPS button works as a reset button only when you
press it when the camera is powering on.
 Press the WPS button on the camera, and then press the
WPS button on the router will establish a connection as
well, and the expire time of WPS connection on the
camera is 120s.
 The link indicator blinks if the wireless connection is
succeeded.

HIKVISION DS-2CD2512F-I Specifications

General

Brand	HIKVISION
Model	DS-2CD2512F-I
Category	Security Camera
Language	English