EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2CD2732F-I

HIKVISION DS-2CD2732F-I User Manual

HIKVISION DS-2CD2732F-I
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Network Dome Camera·Quick Operation Guide
14
14
want to route the cables on the surface of the ceiling. Refer to
Conduit Installation on the Side for side cable routing.
5. Attach the camera to the ceiling by aligning the holes of the back
box with the holes on the ceiling.
6. Secure the camera with the supplied screws as shown in Figure
2-3.
Secure the Camera Figure 2-3
7. Route the cables through the cable hole.
8. Connect the video output connector to the monitor. Connect the
power connector to the power supply.
9. Adjust the image and focus. Please refer to the section 2.3 for
more detailed information.
10. Install the inner black liner back to the camera.
11. Install the bubble back to the camera and secure it with screws
as shown in Figure 2-4.
Screw
Back Box

Other manuals for HIKVISION DS-2CD2732F-I

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD2732F-I and is the answer not in the manual?

HIKVISION DS-2CD2732F-I Specifications

General IconGeneral
TypeIP security camera
PTZ controlYes
Placement supportedOutdoor
Connectivity technologyWired
Form factorDome
Mounting typeCeiling
Product colorWhite
Protection featuresVandal proof
International Protection (IP) codeIP66
Total megapixels3 MP
Maximum resolution2048 x 1536 pixels
Supported video modes1080p, 720p
Video formats supportedH.264, M-JPEG
Supported graphics resolutions1280 x 960, 1280 x 720 (HD 720)
Pan range0 - 360 °
Tilt angle range0 - 75 °
Angle of rotation360 °
Camera shutter speed1/30 - 1/100000 s
Minimum illumination0.095 lx
Sensor typeCMOS
Optical sensor size1/3 \
Optical zoom- x
Zoom capability-
Focal length range- mm
Password protection typeUser
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size64 GB
LED typeIR
Night vision distance20 m
Cabling technology10/100Base-T(X)
Supported network protocolsTCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP, ICMP, IGMP, SNMP, FTP, 802.1X, QoS, HTTPS
Ethernet LAN (RJ-45) ports1
DC output voltage+12V
Power source typePoE
Power consumption (max)5.5 W
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Weight and Dimensions IconWeight and Dimensions
Height99.9 mm
Weight1000 g
Diameter140 mm

Related product manuals