EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2CD2732F-I

HIKVISION DS-2CD2732F-I User Manual

HIKVISION DS-2CD2732F-I
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Network Dome Camera·Quick Operation Guide
26
26
3 Setting the Network Camera over the
LAN
Purpose:
To view and configure the camera via LAN (Local Area Network), you
need to connect the network camera in the same subnet with your
PC. Then, install the SADP or PCNVR software to search and change
the IP of network camera.
The following figure shows the cable connection of network
camera and PC:
Wiring over LAN Figure 3-1
Set the IP address of the camera for accessing via LAN.
Steps:
1. To get the IP address, you can choose either of the following
methods:
Use SADP, a software tool which can automatically detect
network camera in the LAN and list the device information like IP
address, subnet mask, port number, device serial number, device
version, etc., shown in 0.

Other manuals for HIKVISION DS-2CD2732F-I

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD2732F-I and is the answer not in the manual?

HIKVISION DS-2CD2732F-I Specifications

General IconGeneral
TypeIP security camera
PTZ controlYes
Placement supportedOutdoor
Connectivity technologyWired
Form factorDome
Mounting typeCeiling
Product colorWhite
Protection featuresVandal proof
International Protection (IP) codeIP66
Total megapixels3 MP
Maximum resolution2048 x 1536 pixels
Supported video modes1080p, 720p
Video formats supportedH.264, M-JPEG
Supported graphics resolutions1280 x 960, 1280 x 720 (HD 720)
Pan range0 - 360 °
Tilt angle range0 - 75 °
Angle of rotation360 °
Camera shutter speed1/30 - 1/100000 s
Minimum illumination0.095 lx
Sensor typeCMOS
Optical sensor size1/3 \
Optical zoom- x
Zoom capability-
Focal length range- mm
Password protection typeUser
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size64 GB
LED typeIR
Night vision distance20 m
Cabling technology10/100Base-T(X)
Supported network protocolsTCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP, ICMP, IGMP, SNMP, FTP, 802.1X, QoS, HTTPS
Ethernet LAN (RJ-45) ports1
DC output voltage+12V
Power source typePoE
Power consumption (max)5.5 W
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Weight and Dimensions IconWeight and Dimensions
Height99.9 mm
Weight1000 g
Diameter140 mm

Related product manuals