EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2CD6986F

HIKVISION DS-2CD6986F User Manual

HIKVISION DS-2CD6986F
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Network Dome Camera·Quick Start Guide
24
24
4. Connect the cables.
5. For water-proofing, you can install a water-proof jacket to
network cable (refer to Section 2.5) and apply thread seal tape to
other cable connections.
6. Align the screws holes on the camera base to the installed screws,
and rotate the camera clockwise to hook to the camera to the
screws.
7. Fasten the screws to secure the camera to the bracket.
Install the Camera to the Bracket (2) Figure 2-18
8. Adjust the surveillance angle. Refer to Step 5 in Section 2.2
9. Place the dome cover on the camera body with the screw holes
aligned. Secure the dome cover with the supplied screws and
screwdriver.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD6986F and is the answer not in the manual?

HIKVISION DS-2CD6986F Specifications

General IconGeneral
TypeIP security camera
CertificationCE
Placement supported-
Connectivity technologyWired
Wide Dynamic Range (WDR)Yes
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Sensor typeCMOS
Optical sensor size1/1.8 \
Pan range0 - 360 °
Tilt angle range45 - 90 °
Camera shutter speed1/25 ~ 1/100000 s
Minimum illumination0.002 lx
Fixed focal length5 mm
Lens mount interfaceCS mount
Total megapixels7.3 MP
Maximum resolution4096 x 1800 pixels
Image quality adjustmentBrightness, Contrast, Saturation, Sharpness
Video compression formatsH.264, M-JPEG
Supported graphics resolutions1920 x 1200 (WUXGA), 3840 x 2400
Audio input channels1 channels
Password protection typeUser
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.3at
Ethernet interface typeGigabit Ethernet
Supported network protocolsTCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, QoS, IPv6, Bonjour
InterfaceRJ-45/RS-485
Ethernet LAN (RJ-45) ports1
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size128 GB
IK codeIK10
Form factorDome
Product colorWhite
DC output voltage12
Power source typeDC, PoE
Power consumption (max)22 W
Weight and Dimensions IconWeight and Dimensions
Height159 mm
Weight2850 g
Diameter195 mm

Related product manuals