Need help?Do you have a question about the HIKVISION DS-2CD6362F-I and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ control | Yes |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Form factor | Dome |
| Mounting type | Ceiling/wall |
| Product color | White |
| Total megapixels | 6 MP |
| Maximum resolution | 3072 x 2048 pixels |
| Supported video modes | - |
| Video formats supported | H.264, M-JPEG |
| Supported graphics resolutions | 1024 x 768 (XGA), 2048 x 1536 (QXGA) |
| Camera shutter speed | 1/25 - 1/100000 s |
| Minimum illumination | 0.3 lx |
| Field of view (FOV) angle | 360 ° |
| Sensor type | CMOS |
| Optical sensor size | 1/1.8 \ |
| Optical zoom | - x |
| Focus adjustment | 2.8 |
| Fixed focal length | - mm |
| Password protection type | User |
| Compatible memory cards | MicroSD (TransFlash), MicroSDXC |
| Maximum memory card size | 64 GB |
| LED type | IR |
| Night vision distance | 15 m |
| Wi-Fi | No |
| Cabling technology | 10/100/1000Base-T(X) |
| Supported network protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTC P, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
| Ethernet LAN (RJ-45) ports | 1 |
| Signal-to-Noise Ratio (SNR) | 120 dB |
| DC output voltage | +12V |
| Power source type | PoE |
| Power consumption (max) | 11 W |
| Operating temperature (T-T) | -10 - 60 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Depth | 152.8 mm |
|---|---|
| Width | 164 mm |
| Height | 43.8 mm |
| Weight | 1400 g |
To Next Page
