EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2CD6362F-I

HIKVISION DS-2CD6362F-I User Manual

HIKVISION DS-2CD6362F-I
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
User Manual of Network Fisheye Camera
3
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are
neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are
neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
Please adopt the power adapter which can meet the safety extra low voltage
(SELV) standard. And source with 12 VDC or 24 VAC (depending on models)
according to the IEC60950-1 and Limited Power Source standard.
If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
To reduce the risk of fire or electrical shock, do not expose this product to rain or
moisture.
This installation should be made by a qualified service person and should conform
to all the local codes.
Please install blackouts equipment into the power supply circuit for convenient
supply interruption.
Please make sure that the ceiling can support more than 50(N) Newton gravities if
the camera is fixed to the ceiling.
If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)

Table of Contents

Other manuals for HIKVISION DS-2CD6362F-I

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD6362F-I and is the answer not in the manual?

HIKVISION DS-2CD6362F-I Specifications

General IconGeneral
TypeIP security camera
PTZ controlYes
Placement supportedIndoor
Connectivity technologyWired
Form factorDome
Mounting typeCeiling/wall
Product colorWhite
Total megapixels6 MP
Maximum resolution3072 x 2048 pixels
Supported video modes-
Video formats supportedH.264, M-JPEG
Supported graphics resolutions1024 x 768 (XGA), 2048 x 1536 (QXGA)
Camera shutter speed1/25 - 1/100000 s
Minimum illumination0.3 lx
Field of view (FOV) angle360 °
Sensor typeCMOS
Optical sensor size1/1.8 \
Optical zoom- x
Focus adjustment2.8
Fixed focal length- mm
Password protection typeUser
Compatible memory cardsMicroSD (TransFlash), MicroSDXC
Maximum memory card size64 GB
LED typeIR
Night vision distance15 m
Wi-FiNo
Cabling technology10/100/1000Base-T(X)
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTC P, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Ethernet LAN (RJ-45) ports1
Signal-to-Noise Ratio (SNR)120 dB
DC output voltage+12V
Power source typePoE
Power consumption (max)11 W
Operating temperature (T-T)-10 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth152.8 mm
Width164 mm
Height43.8 mm
Weight1400 g

Related product manuals