HIKVISION DS-2CD6362F-I User Manual

User Manual of Network Fisheye Camera
35
Figure 5-14 SNMP Settings
2. Check the corresponding version checkbox ( ,
, ) to enable the feature.
3. Configure the SNMP settings.
Note: The settings of the SNMP software should be the same as the settings you
configure here.
4. Click Save to save and finish the settings.
Note: A reboot is required for the settings to take effect.
5.3.6 Configuring 802.1X Settings
Purpose:
The IEEE 802.1X standard is supported by the network cameras, and when the feature
is enabled, the camera data is secured and user authentication is needed when

HIKVISION DS-2CD6362F-I Specifications

General

Type	IP security camera
PTZ control	Yes
Placement supported	Indoor
Connectivity technology	Wired
Form factor	Dome
Mounting type	Ceiling/wall
Product color	White
Total megapixels	6 MP
Maximum resolution	3072 x 2048 pixels
Supported video modes	-
Video formats supported	H.264, M-JPEG
Supported graphics resolutions	1024 x 768 (XGA), 2048 x 1536 (QXGA)
Camera shutter speed	1/25 - 1/100000 s
Minimum illumination	0.3 lx
Field of view (FOV) angle	360 °
Sensor type	CMOS
Optical sensor size	1/1.8 \
Optical zoom	- x
Focus adjustment	2.8
Fixed focal length	- mm
Password protection type	User
Compatible memory cards	MicroSD (TransFlash), MicroSDXC
Maximum memory card size	64 GB
LED type	IR
Night vision distance	15 m
Wi-Fi	No
Cabling technology	10/100/1000Base-T(X)
Supported network protocols	TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTC P, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Ethernet LAN (RJ-45) ports	1
Signal-to-Noise Ratio (SNR)	120 dB
DC output voltage	+12V
Power source type	PoE
Power consumption (max)	11 W
Operating temperature (T-T)	-10 - 60 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Depth	152.8 mm
Width	164 mm
Height	43.8 mm
Weight	1400 g