Quick Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Chapter 2 Search and Modify IP
SADP (Search Active Devices Protocol) software can automatically search the IP address of network
cameras in the same local area network (LAN) with connection diagram as following:
Figure 2.1
The operation of searching and modifying IP address is described as following:
Description of SADP V 2.0
SADP (Search Active Devices Protocol) is a kind of user-friendly and installation-free online device search tool. It
searches the active online devices within your subnet and displays the information of the devices. You can also
modify the basic network information of the devices using this software.
Search active devices online
Search online devices automatically
After launch the SADP software, it automatically searches the online devices every 15 seconds from the
subnet where your computer locates. It displays the total number and information of the searched devices
in the Online Devices interface. Device information including the device type, IP address, port number,
gateway, etc. will be displayed.
To Next Page
Loading...
Need help?
General
