HIKVISION DS-2CE11D0T-PIRLO User Manual

 Keep the camera away from liquid while in use for
non-water-proof device.
 While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
Mark Description
Table 0-1 Mark Description
Mark
Description
DC Voltage
1 Introduction
1.1 Product Features
The main features are as follows:
 High performance CMOS sensor
 IR cut filter with auto switch
 OSD menu with configurable parameters
 Auto white balance
 SMART IR
 Strobe light alarm
 Alarm out
 PIR detection
 3-axis adjustment
 Alarm linkage with DVR
1.2 Overview
This manual applies to two types of the bullet camera.
The overviews of each type are shown in the figures
below.
1.2.1 Overview of Type I Camera
DC12V IN
Alarm Cable
Power Cord
Video Cable
Bracket
Main Body
Lens
White Light
Source
PIR
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type II Camera
PIR
Lens
Main Body
Bracket
Alarm Cable
Video Cable
Power Cord 12
VDC
Figure 1-2 Overview of Type II Camera Installation
2 Installation
Before you start
 Make sure that the device in the package is in good
condition and all the assembly parts are included.
 Make sure that all the related equipment is power-off
during the installation.
 Check the specification of the products for the
installation environment.
 Check whether the power supply is matched with
your power output to avoid the damage.

HIKVISION DS-2CE11D0T-PIRLO Specifications

General

Brand	HIKVISION
Model	DS-2CE11D0T-PIRLO
Category	Security Camera
Language	English