HIKVISION DS-2CE16D0T-EXLF User Manual

 Do not aim the camera at the sun or extra bright
places.
 The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
 Do not expose the device to high electromagnetic
radiation or extremely hot, cold, dusty or damp
environment.
 To avoid heat accumulation, good ventilation is
required for the operating environment.
 Keep the camera away from liquid while in use for
non-water-proof device.
 While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
 The beam of the light at the distance of 200 mm is
classified as Risk Group 1 (RG1). Possible hazardous
optical radiation emitted from this product.
 DO NOT stare at operating light source. May be
harmful to the eyes.
 Wear appropriate eye protection or turn on the
supplement light only at a safe distance (0.25 m) or in
the area that is not directly exposed to the light when
installing or maintaining the device.
1 Introduction
1.1 Product Features
The main features are as follows:
 High performance CMOS sensor
 OSD menu with configurable parameters
 Smart light
 3-axis adjustment
 Hybrid supplement light with IR and white light
1.2 Overview
1.2.1 Overview of Type I Camera
Bracket
Main Body
Lens
Power Cord
Video Cable
Switch Button
Figure 1-1 Overview of Type I Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS.
1.2.2 Overview of Type II Camera
Main Body
Switch Button
Power Cord
Video Cable
Lens
Bracket
Figure 1-2 Overview of Type II Camera

HIKVISION DS-2CE16D0T-EXLF Specifications

General

Brand	HIKVISION
Model	DS-2CE16D0T-EXLF
Category	Security Camera
Language	English