2. Drill screw holes and the cable hole (optional) in the
ceiling/wall according to the holes of the drill
template;
Figure 2-9 Drill Template of the Junction ox
Note:
to route the cable;
3.
junction box’s cover;
4.
supplied screws;
5.
on the ceiling/wall;
6.
box’s body;
7.
junction box;
Drill the cable hole, when adopting the ceiling outlet
Take apart the junction box, and align the screw holes
of the turret camera’s mounting base with those on
Fix the mounting base on junction box’s cover by
Figure 2-10 Install Turret amera’s Mounting ase
Secure the junction box’s body with supplied screws
Figure 2-11 Install the Junction ox’ amera ody on
eilling/Wall
ombine the junction box’s cover with the junction
Repeat steps 5 to 8 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to install the camera to the
Figure 2-12 Fix the amera to the Junction ox
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
To Next Page
Loading...
Need help?
General