HIKVISION DS-2CE71D8T-PIRL User Manual

 Keep the camera away from liquid while in use for
non-water-proof device.
 While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
Mark Description
Table 0-1 Mark Description
Mark
Description
DC Voltage
1 Introduction
1.1 Product Features
The main features are as follows:
 High performance CMOS sensor
 IR cut filter with auto switch
 OSD menu with configurable parameters
 Auto white balance
 Internal synchronization
 SMART IR mode
 Visible alarm
 PIR detection
 3-axis adjustment
 Alarm linkage with DVR
1.2 Overview
DC12VIN
Enclosure
Main Body
Mounting
Base
Power Cord
12 VDC
Video Cable (TVI)
White Light Source
PIR
Figure 1-1 Overview of Type I Camera
2 Installation
Before you start:
 Make sure that the device in the package is in good
condition and all the assembly parts are included.
 Make sure that all the related equipment is power-off
during the installation.
 Check the specification of the products for the
installation environment.
 Check whether the power supply is matched with
your required output to avoid damage.
 Make sure the wall is strong enough to withstand
three times the weight of the camera, and the
mount.
 If the wall is cement, insert expansion screws before
installing the camera. If the wall is wooden, use
self-tapping screw to secure the camera.
 If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.

HIKVISION DS-2CE71D8T-PIRL Specifications

General

Brand	HIKVISION
Model	DS-2CE71D8T-PIRL
Category	Security Camera
Language	English